Downloading Windows

This article is a guide that helps you download Windows and create an installation media, for re-installing.

Method 1: The Media Creation Tool

Note

At least 8 GB of space on the C: drive is required to run the tool.

Downloading the tool

1. For Windows 10, go to https://www.microsoft.com/software-download/windows10
   For Windows 11, go to https://www.microsoft.com/software-download/windows11

2. Click the Download Tool Now button.

   

3. After the tool has been downloaded, run it.

Using the tool

1. The first thing you will see is this screen, click Accept.

   

2. The next screen you see will be this, wait for the installer to complete preparation.

   

   Note

   On the Windows 11 Media Creation Tool, the below option won't be displayed and you will be asked to either save an ISO file or use a USB drive directly. If you are using Media Creation Tool to do an in-place upgrade, follow the instructions in Method 2, then go to the Troubleshooting page for further guidance.

3. This is where you select what you want to do.

   • If you want to repair the Windows installation on this computer click Upgrade this PC now and follow the instructions in the Troubleshooting page.

   • If you want to reinstall Windows on another computer click Create installation media and follow the instructions below.

   

Creating installation media

You need a blank USB with at least 8 GB of space for the following steps.

1. Select the correct Architecture, Edition and Language of Windows, or use the recommended settings.

   Note

   If you're planning on installing Windows on another PC and don't know what to select for the architecture, then choose both x86 and x64.

   

2. Select USB Flash Drive.

   

3. Select the USB that you have inserted. ANY DATA ON THE USB WILL BE ERASED

   

4. Wait for Windows to finish downloading.

   

After this, you will see a screen saying that the flash drive is ready. Click finish, eject the USB, take it out and insert it into the computer that is not working.

Method 2: Downloading the ISO

1. Select the correct Architecture, Edition and Language of Windows, or use the recommended settings.

   Note

   If you're planning on installing Windows on another PC and don't know what to select for the architecture, then choose both x86 and x64.

   

2. On the Media Creation Tool, select ISO file.

   

3. Select a path to save to.

After that, Windows will start downloading the ISO file.

Using the ISO with Rufus

This step is optional, but in case you want more customizability than Media Creation Tool you could use Rufus to flash the Windows ISO to your USB drive.

1. Download Rufus from rufus.ie

   TIP

   You can choose the portable or the non-portable version, it doesn't matter much.

2. Open Rufus. You'll see an interface like this.

   

3. Select your USB drive from the Device dropdown.

   Note

   If your USB drive doesn't appear, select Show advanced drive properties then check List USB Hard Drives.

4. Use the Select button to locate your ISO file which you downloaded before.

   

5. Choose the appropriate partition scheme and target system for the PC you'll use it on. If you are unsure, you can use the target system as BIOS or UEFI, and the partition scheme as MBR.

6. Select the Start button to start flashing Windows on the USB drive, then use whatever customization option you want if it asks you. If you are unsure, uncheck all of them and select OK.

DANGER

Before starting, make sure to back up any important data on the USB drive if there's any. This operation will erase all of the data on the USB drive.

How to re-install Windows

For more guidance regarding re-installing Windows, see Installing Windows.